The right tamper-evident seal depends on what you need it to leave behind. Some labels transfer a VOID message onto the box or product. Some keep that message in the film and come off clean. Some break into pieces. Hologram seals add a color-shifting image that is hard to copy with ordinary printing. The chart below compares those four common types so you can match the evidence you want to the surface you have.
Intertronix non-residue seals are a VOID type: the word VOID appears in the label itself, and the surface stays clean. They are listed once, as non-residue VOID, rather than as two separate rows.
| Seal type | What it shows when removed | What it proves | Typical uses | Surfaces it suits | Shop this type |
|---|---|---|---|---|---|
| Residue VOID | A hidden VOID message sits in the adhesive. When the label is peeled, it splits, and a VOID pattern transfers to the surface and stays visible on the peeled film as well. Color residue seals (TamperColor) work the same way, leaving a VOID message on the surface. | The seal was peeled or disturbed, and a leftover VOID mark remains on the item or carton, so the attempt stays visible after the label is gone. | Asset identification, warranty seals over screws, battery covers, or access panels, equipment labels, and packaging closures. | The TamperVoid metallic line is described for smooth plastics, metals, powder-coated panels, and coated cardboard. Always test on the actual surface, especially if it is textured, curved, or dirty. |
Metallic residue VOID labels Color residue VOID labels |
| Non-residue VOID | A VOID pattern forms in the label itself rather than transferring to the surface. The film is made to lift without leaving sticky residue behind, so the seal cannot be pressed back down without showing VOID, and the surface stays clean. | The seal was peeled (the film now shows VOID), and the item is left clean enough to inspect, return, or reseal. | Reusable cases, totes, and loaner or rental equipment; electronics and equipment returns; and other items where leftover adhesive would get in the way or cover a serial plate. Also used on calibration equipment and on objects that hold valuables or confidential information. | Best where a clean release matters as much as the VOID mark. These are polyester labels, including a clear option, in a range of colors. Performance still varies by surface, so test a sample first. | Non-residue VOID labels |
| Destructible / frangible | The label breaks into small fragments instead of peeling off in one piece. There is no intact label left to restick, move, or swap. | Someone tried to remove the seal. Fragments, a torn outline, or a patchy remainder make that attempt visible. | Electronics housings, equipment access panels, cabinets, and cartons. The same white stock is also used as a one-time asset nameplate, because printed barcodes on white scan cleanly with commercial readers. | Use it where a label that falls apart is more useful than a label that peels. Test on the exact housing, panel, or carton before a production run. These stock labels are white. | Destructible labels |
| Hologram / TamperMax | The hologram shows a VOID or Beehive pattern when it is peeled, so a broken seal cannot pass as untouched. The face itself is a color-shifting, light-reflecting image. The TamperMax category page on intertronix.com also describes a VOID pattern left on the surface beneath. | Two things at once: the seal was disturbed, and the hologram is a visual authenticity cue that is difficult to reproduce with ordinary printing. | Product packaging and brand protection, authenticity checks, and warranty seals on electronics access panels, screws, or battery covers. | These are thin polyester hologram labels. There is no single surface list that fits every product, so test the size and finish on the actual pack, cap, or panel. Custom print, including a logo or serial numbers on a TamperMax base, is available separately. |
Hologram security labels Custom-printed hologram stickers |
How to use the chart
Start with the leftover you can accept, then the surface. If a VOID mark left on the product or carton is useful, a residue VOID label is the usual match. If the item comes back to be sealed again, or leftover adhesive would cover a nameplate, use a non-residue VOID label. If you need the seal itself to fall apart rather than peel off whole, use a destructible label. If you also want a visual authenticity check, use a hologram seal.
For master cases and shipping cartons, tamper-evident security tape does the same kind of job at carton scale: peeling it back exposes a VOID message so a receiving team can see whether a case was opened in transit.
Adhesion and the way a VOID, Beehive, or fragment pattern appears can still vary from one surface to the next. Test a sample on your own material before you commit to a production run.
Intertronix manufactures these seal types in Chula Vista, California, and can help you match a material to a specific surface or packing line. For a type, size, or print option not shown here, contact Intertronix. To test first, request a free sample pack.
Search